Home >

Textile Knowledge: Method Of Removing Foreign Fibers In Cotton Spinning Enterprises

2020/3/6 14:07:00 0

Cotton Spinning EnterprisesForeign Fiber Method

Foreign fiber refers to the non cotton fibers and colored fibers mixed into cotton, which seriously affect the quality of cotton and its products, such as chemical fibers, hair, silk, hemp, plastic film, plastic rope, dyeing line (rope, Butch). The foreign fiber has the characteristics of small content, great harm and uncertainty. In the textile process, it is not only difficult to remove, but also can be broken or combed into shorter, thinner and more fibrous fine spots in the carding process, resulting in a decline in the quality of cotton products, resulting in uneven dyeing of cloth and affecting appearance.

The problem of eliminating foreign fibers has always troubled the textile enterprises. Due to the shortage of labor resources and the rise of wage costs, artificial selection of foreign fibers has been gradually replaced by intelligent instruments or equipment. At present, enterprises are generally strictly controlled from three stages, namely, raw cotton control, cleaning process of foreign fiber sorting machine and winding work order, so as to eliminate the influence of foreign fibers to a maximum extent.

1. strictly control the source of raw cotton.

To solve the problem of foreign fiber, we should first control it from raw cotton. The total amount of foreign fibers in raw cotton will directly affect the scavenging rate and the amount of foreign fibers. We should seek raw cotton suppliers with high quality and good quality control, so as to ensure the quality of raw cotton. Secondly, after the raw cotton is put into the factory, the raw cotton should be inspecting the conventional physical indicators while the raw cotton content should be sampled. According to the classification of raw cotton and the control standard of raw cotton, the raw cotton should be classified according to the foreign fiber content, so as to make cotton assorting.

   2. foreign fiber machine to remove foreign fibers.

At present, there are two kinds of detection methods for the detection of foreign fibers in cotton cleaning process at home and abroad. Among them, photoelectric detection and ultrasonic detection are the major categories of detection methods. The photoelectric type is divided into two ways, namely photoelectric tube type and CCD mode. The main features are as follows:

   In practical applications, due to many factors such as shielding, wrapping and noise of cotton, although the use of foreign fiber machine, but there are still leaked fiber, the detection rate is not high. Therefore, enterprises began to implement "one line two machines", that is, two different types of foreign fiber machines were used in series, and two times of loosening and two tests were used to solve the problem of foreign fiber shielding and further improve the removal effect of foreign fibers. After the first pass of the foreign fiber machine, the cotton removed most of the three silk, but there were still some three silk which were hidden in the dead corner, wrapped by cotton and covered, and could not be removed. After second times of the cotton flow, the cotton fibers were remixed loose after mixing the cotton boxes, ensuring that the three evenly spread out of the dead ends and the net leakage.

3, from the end of the clearance of the yarn.

An automatic electronic winder equipped with the function of detecting the color heterosexual fibers is arranged on the automatic winder, and the yarn can be removed after the discovery of foreign fibers, which can effectively remove the foreign fibers. It is based on the original photoelectric electronic yarn clearer, adding a photoelectric fiber detection device. This photoelectricity specially detects colored foreign fibers. It can not only remove colored fibers and foreign fibers, but also remove colourless fibers. It can solve the problem of bleaching yarns differently.

There is a limit to the control methods and effects of the spinning mills for foreign fibers. The fundamental way to solve the foreign fibers is to strengthen management in the cotton planting, picking and processing stages, and avoid mixing foreign fibers. It is hoped that domestic cotton can solve the problem of mixing foreign fibers in picking and processing as soon as possible, and improve the overall quality of domestic cotton.

  • Related reading

Combing Problems And Solutions Of Fine Tex Fiber

Shoes and clothing technology
|
2020/2/27 10:18:00
0

How Many Passes Will The Garment Factory Switch To?

Shoes and clothing technology
|
2020/2/26 16:37:00
0

President Jogging Shoes Join The Shanghai Family Marathon, Witness The Running Process Of "Love".

Shoes and clothing technology
|
2016/11/22 12:11:00
43

The Ultimate Form Of Clothing Lets You Stealth Intelligent High-Tech Materials Or Change The World.

Shoes and clothing technology
|
2016/7/6 12:29:00
65

61 The New Arrival Of Children Is Not Just A Gift, But Also A Love And Upward Force.

Shoes and clothing technology
|
2016/5/27 16:02:00
95
Read the next article

The Price Of Dyes Has Soared. Has The Textile "Gold Three" Season Come?

At present, the new coronavirus infection pneumonia continues, the textile industry chain upstream and downstream enterprises are gradually resumed production. Soon came the tradition.