Home >

1 Days, 2 Accidents! Fire Occurred At Fushun Petrochemical Two Plant And Singapore Chemical Waste Treatment Plant

2019/12/13 17:03:00 0

Fushun Petrochemical Two PlantSingapore Chemical Waste Treatment PlantFire

In December 11th, two serious chemical accidents occurred at home and abroad. Although no casualties were caused, serious damage was done to the chemical plants.


One
Singapore waste plant explosion


According to the SCDF of Singapore, a fire broke out at the industrial waste treatment plant located at 48,, Singapore, at 6 a.m. in the morning. The fire lasted 6 hours before it was put out. According to the preliminary investigation, it was learned that the fire factory involved hazardous waste recycling, and there was a lot of oil to be produced and recycled in diesel plant, fuel oil and kerosene. A large number of chemical solvents were stored in the factory.



Fortunately, no one was in the factory, so no casualties were caused. At present, the local State Environmental Bureau (NEA) has sampled that air quality is not abnormal at the scene and is still in the safe range. The cause of the fire is still under investigation.


Two
Fushun oil two factory fire


Coincidentally, on the same day, they also store large quantities of oil. Fuel leakage and flash ignition of 109 pipelines in two oil plant of PetroChina Fushun Petrochemical Branch Company Firefighters spend more than 3 hours. Successfully extinguished fires. No casualties The product oil storage tank and dozens of pipelines for transporting inflammable and explosive chemical products have been kept safe, avoiding the occurrence of secondary disasters such as malignant explosion and environmental pollution.




Public information shows that Fushun Petrochemical is a large scale petrochemical enterprise integrating oil, chemical fiber, plastic and wax washing. It has a history of 80 years and has an important position and influence in China's petroleum and petrochemical industry.
Three
Attention should be paid to safety of inflammable materials. 


There are a lot of inflammable substances in the chemical industry. There are strict requirements for the placement and storage of inflammable materials in the industry. Factories that store large quantities of fuel, solvents and other combustibles must do the following:


First, implement fire responsibility and strengthen fire management.
1, improve fire safety management organization, identify responsible persons at all levels, formulate and improve fire safety rules and regulations, increase fire investment, strengthen daily fire management, eliminate fire violations, and rectify fire hazards.
2, formulate fire protection work plan, carry out monthly fire safety inspection, strengthen daily fire prevention inspection, identify key fire prevention parts, clarify inspection contents, find problems and promptly instruct workshop team correction.

Two, strengthen fire education, training and training.
1. Carry out a fire knowledge training for all staff, focus on training position fire prevention technology, operation rules, fire extinguishers and fire hydrant usage, evacuate knowledge, fire basic laws, regulations and rules and regulations.
2. Organize a fire drill among all the staff to practice skills of firefighting and organize evacuation skills.

Three, improve technical precautions.
1. Analyze the fire risk of various parts and posts of factories, find out the weak links, and formulate targeted preventive measures.
2, check and improve fire alarm systems, fire automatic fire extinguishing systems, fire signs and fire emergency lighting, fire evacuation and fire prevention zones, smoke prevention zones, fire truck passages, fire shutters, smoke control systems, emergency fire broadcasts and fire extinguishers.
3, install monitoring equipment, and fire facilities linkage, early detection and removal of fire hazards.

Four, strengthen fire source supervision
1. Carefully analyze the locations where the factory can generate fire sources and take preventive measures one by one.
2. Pay special attention to the selection, quality and daily management of wires and electrical appliances.
3. Approving the use of open flames, especially electrical welding and equipment maintenance, building decoration, etc.
4, check lightning protection and anti-static facilities to ensure integrity.
5, check the place where sparks and inflammable and explosive gases are easily produced in the production. Are there fire and explosion protection measures?
  • Related reading

Director Of The Foreign Trade Division Of The Ministry Of Commerce On China'S Foreign Trade In 1-11 2019

Daily headlines
|
2019/12/13 17:03:00
0

Uzbekistan Made Many Initiatives To Promote The Development Of Textile Industry In 2020

Daily headlines
|
2019/12/13 17:03:00
0

Successful Efforts To Help Local Enterprises "Go Out", "Silk Road Keqiao Is Full Of The World" Has A Bumper Harvest.

Daily headlines
|
2019/12/13 17:02:00
0

The Latest Holiday Arrangements Are Made: The Dyeing Plant Will Stop In January 6Th, And The Weaving Factory Will Focus On The First Half Of January.

Daily headlines
|
2019/12/13 17:01:00
0

Capacity Expansion Is Still In The "Cold Winter" Caprolactam Down And How To Break?

Daily headlines
|
2019/12/13 17:01:00
0
Read the next article

How To Build 100 Billion Industrial Cluster Of Textile And Clothing In Hengyang?

In December 12th, the entrepreneur forum of South Hunan textile industry base was held in Changning City. More than 150 entrepreneurs in textile industry