Home >

Medical Knowledge: The Key Technology Of Medical Protective Clothing Production, Do You Know?

2020/2/10 21:28:00 59

Military UniformMedical Protective Clothing.

Cheng Fei, general manager of Shanxi Bing Juan Industrial (Group) Co., Ltd.: medical protective clothing is used as a class of chemical protective clothing, mainly used for medical staff to wear. It not only needs to discharge moisture, breathe freely and wear freely, but also enables medical personnel to avoid infection of viruses, bacteria and other pollutants in the process of diagnosis and treatment, to resist water, alcohol and oil intrusion, and to effectively resist static electricity. And even prevent dust from entering.

First of all, materials should be used to meet the requirements of "three rejecting one resistance" (i.e. water repellency, blood refusal, alcohol refusal and antistatic). This composite material can be made of different materials, such as polyethylene / polypropylene spun adhesive nonwoven fabric, compounded with breathable microporous membrane or other nonwoven fabrics, or combined with spunlaced nonwoven fabric and breathable microporous membrane, or spunlaced nonwovens with wooden paddles.

At present, the non-woven materials used in several medical protective clothing sold and developed in the domestic market are mainly polypropylene spunbonded fabric, Spunlaced fabric made of polyester fiber and wood pulp, polypropylene spunbonded melt blown spunbonded nonwoven fabric, namely SMS or SMMS, high polymer coated fabric, polyethylene breathable film / nonwoven composite cloth.

"Common medical protective clothing is usually connected by hats, tops and trousers. In order to facilitate the wear and tear, and make the bonding more close, the closed door design is usually used in the design, that is, the internal zipper is closed, the external gluing of the plaid is done, and the zipper and the Velcro are pressed through the flat seam. Then, it is made by cutting, suturing, tightening and gluing.

In order to enhance the isolation performance and safety of medical protective clothing. After sewing, it is necessary to glue and seal the stitches and pinholes left in the production so as to prevent dust or liquid from entering the needle holes of sewing.


  • Related reading

The First Stunning Show Of "Er Ke Qi" And "Double-Sided Beauty" Is How To See Two Flowers In Black Technology.

science and technology culture
|
2020/1/14 14:06:00
609

Walking On The Walk Laboratory Airborne "The World'S Largest Doll Dynamic Device Window" Shocked Hangzhou People

science and technology culture
|
2019/12/23 10:15:00
273

Textile Engineering And Environmental Engineering Major In The Promotion Of Engineering Education Accreditation Of Xi'An Polytechnic University

science and technology culture
|
2019/12/2 14:35:00
2

H&M Will Test The Staining Technology Of Environmental Protection Microorganisms, Using Bacteria As Dyes.

science and technology culture
H&M
|
2019/12/2 13:35:00
5

Knowledge Of Elastic Fiber: 6 Kinds Of Elastic Fibers That Textile People May Not All Understand.

science and technology culture
|
2019/11/29 18:40:00
1
Read the next article

They Are Racing Against The Epidemic: Shanxi Jihua 3534 Has Obtained Medical Disposable Protective Clothing Production License.

In February 9th, the medical disposable protective clothing samples produced by Jihua 3534 Garments Co., Ltd. were tested and qualified, and obtained the "medical device production license" and the "People's Republic of China medical device registration certificate" issued by the Shanxi provincial drug administration. It has become the first Shanxi province to obtain a medical disposable protective clothing production license since the outbreak of the epidemic.